歡迎光臨华体会电竞app苹果版網站!
誠信促進發展,實力鑄就品牌
服務熱線:

18217358524

產品展示 / products 您的位置:網站首頁 > 產品展示 > 電力監控與保護 > 測溫 > ATE300P開關櫃無線測溫傳感器

開關櫃無線測溫傳感器

簡要描述:開關 櫃無線測溫傳 感器係列無線測溫傳 感器根據 《NB/T 42086-2016無線測溫裝置技術要求》 開發,可用於 戶內 開關 櫃,包括中置櫃、手車櫃、固定櫃、環網櫃等多種開關 櫃;也可用於 0.4kV低壓櫃,包括固定櫃,抽屜櫃等。無線測溫傳 感器可安裝於 櫃內 何發熱點上,利用無線數據傳 輸技術實時發送監測數據,再通過接收裝置將溫度數據傳 輸到顯示裝置或者遠程監控係統。

產 品型號: ATE300P

所屬分類:測溫

更新時間:2024-11-13

廠商性質:生產 廠家

詳情介紹

                                                                                                                                                         华体会棋牌透视開關 櫃無線測溫傳 感器

開關 櫃無線測溫傳 感器ATE 3~35kV係列無線測溫傳 感器根據 《NB/T 42086-2016無線測溫裝置技術要求》 開發,可用於 戶內 開關 櫃,包括中置櫃、手車櫃、固定櫃、環網櫃等多種開關 櫃;也可用於 0.4kV低壓櫃,包括固定櫃,抽屜櫃等。無線測溫傳 感器可安裝於 櫃內 任何發熱點上,利用無線數據傳 輸技術實時發送監測數據,再通過接收裝置將溫度數據傳 輸到顯示裝置或者遠程監控係統。

型號說明

image.png


技術指標

image.png

image.png



image.png



1.4產 品安裝

無線溫度傳 感器共有多種型號,分別對應磁吸固定、螺栓固定、表帶固定、合金片固定等安裝方式

image.png



image.png


image.png



如果安裝ATE100 ATE200P ATE100M/ATE100/ATE200/ATE400/ATE100P/ATE200P ASD/ARTM-Pn “編碼:1B的標簽組號一致,安裝位置依照標簽文字安裝,“編碼:"為 安裝第一個 B相,以此類推。ATE200 ATE400,其組號應與 顯示裝置1A "為 安裝第一個 A If the sensor is ATE100M/ATE100/ATE200/ATE400/ATE100P/ATE200P, the number behind “相,組號(Group碼():" should be the same asASD/ARTM-Pn, the sequence of installation is base on the label, “編Code on.):1A" is first one on the phaseA, “編碼(Code):1B" is first one on the phase B,and so注意:出廠時包裝箱內 無線溫度傳 感器與 顯示裝置已配對,不可以與 其他顯示裝置或無線溫度傳 感器混用,無線溫度傳 感器按照標簽安裝。Notice: wireless temperature sensors and display device in the package have been matched before delivery. Do not use them with other display device or other wireless temperatur

together. Please installing them with label on the sensor. 1.4.2.2 ATE傳 感器搭配ATC600-C 1.4.2.2 ATE sensor withATC600-C


image.png


如圖所示,如果安裝應與 ATC600-C ATE100 ATE200P ATE200 ATE300P ATE400 ATE100M/ATE100/ATE200/ATE400/ATE100P/ATE200P/ATE300P,其組號的組號一致,安裝位置依照標簽文字安裝,“編碼:001 "建議安裝在第一個 櫃子的第一個 測溫點,再依次按照測溫點順序安裝。According to the above pictures, If the sensor is ATE100M/100/200/400/100P/200P/300P, the group number of ATE must be same as the group number of ATC600-C and the installation order is base on the label. The code of each sensor is used to distingguish each sensor from same group. “編碼(code): 001 " is recommended to be installed on the first temperature measuring point of the first cabinet, and then installed other sensors in this order. 1.4.2.3 ATE300M傳 感器搭配ATC600-M 1.4.2.3 ATE300M sensor withATC600-M收發器coordinato

image.png



image.png


image.png



image.png



image.png



image.png


image.png









留言詢價

留言框

  • 產品:

  • 您的單位:

  • 您的姓名:

  • 聯係電話:

  • 常用郵箱:

  • 省份:

  • 詳細地址:

  • 補充說明:

  • 驗證碼:

    請輸入計算結果(填寫阿拉伯數字),如:三加四=7